Victorian Dimmer Switch 3 Gang Antique Brass Lacquered

Three dimmer switches on a Victorian style plate made from solid brass with an Antique Brass Lacquered finish.The Victorian plate is flat with simple clean styling that was a characteristic of the Victorian era when practicality and simplicity were the focus. It will suit many styles from traditional and period to contemporary. It can be fitted directly to the wall, but if preferred can be mounted onto a wooden pattress (see link below). This gives the benefit of extra space for the wiring (enabling it to be used with a 25mm back box), and can also cover up messy plastering that might otherwise be visible. Using a pattress with any item in this range also complements our period dome switches.The Antique Brass finish is lacquered with lighter and darker antique tones. It should not be polished with abrasive polishes/cleaners as this will break down the lacquer. Clean with a soft damp cloth followed by an application of a quality wax polish to prolong the life of the lacquer.The high quality switches are made in the UK by Wandsworth.We recommend using a minimum 35mm depth backbox with this product to give a comfortable amount of space for the grid (the switch or socket mechanism) and wiring behind the plate.Dimensions:Height: 85mm; Width: 145mmFeatures of dimmer switches:LED Dimmer moduleOne-way and two-way switch for ON/OFF function.Minimum load down to 5W (1x LED bulb)Maximum total load across the 3 gang plate 210WMax Load to any one dimmer 100W (Max x10 LED lamps per circuit)User settings for minimum dim level and mode setting.Suitable for control of Dimmable LED lamps, Incandescent and Mains HalogenManually select dimmer mode (Leading or Trailing Edge)Thermostat Circuit Protection Further Technical Information: available here.