Air Filter, Dry, 5" Inlet, For use with WCFab Kits

Maintenance – The cleaning / replacement interval depends on your driving conditions. We recommend that you inspect your air filter every 5,000 miles by removing the filter cover and examining the pleats. Keeping your filter cover clean and blowing out your dry air filter with compressed air will help extend the life of the primary filter media. Depending on use conditions we recommend replacing the dry filter every 15-30,000 miles or when you notice that the filter pleats are starting to collapse. – – Cleaning – Your WCFab air filter is a DRY media filter. IT IS NOT WASHABLE. To clean your filter and help extend the life between replacement intervals, use compressed air to blow off the outside of the dry filter keeping the air nozzle moving and no closer than 6 inches to the media. This can be done while the filter is still in the vehicle. If you would like to blow it out further, remove the filter from the intake and take it to a space away from the vehicle and any openings into the engine and blow compressed air through the filter from the inside out being careful not to concentrate the compressed air in one location in the media. Additional Attributes: GTIN: Reusable: No Filter Media Material: Dry Outside Diameter: 7 Height: 11 Shape: Cone Bottom Inside Diameter: 5 Bottom Outside Diameter: 7 Inlet Diameter: 5 Prop 65 Y/N: Y Extended Information: Emissions : Emissions Compliance Exempt Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 14 x 8 x 6 inches Weight: 3 PG